A Guide to Interior Door Frames!

Before buying an interior door, you should know some basic information about interior door frames. Here is a guide to common woods used for door frames. It will also cover such things as the Header beam and Scuff strip. Read on to learn more. Listed below are some tips to help you choose the right frame for your home. Listed below are some common woods for interior door frames:

Common woods used to make interior door frames:

There are several common woods used for interior door frames. Cherry and white pine are two of the most popular woods used to make interior doors. These woods are high in density and resist warping better than other pine types. White pine is a great choice for interior doors that see a lot of use and foot traffic. Hickory wood is another popular choice for flush wall door frames. This type of wood is highly durable and can withstand heavy use and foot traffic.

Housed joints:

A housed joint on an interior door frame is a common type of wood joinery used on doors. It’s the rectangular cavity that’s inserted into the door frame, and it’s used for both hinges and panels. These types of joints are made of wood or thermosetting resin. Some houses have both types of joints, but a housed joint is generally more expensive than a dado joint.

Scuff strip:

One way to protect interior door frames is by installing a scuff strip. These strips are generally made of vinyl or rubber and are applied to the bottom of the door. These strips are typically applied to the bottom portion of sliding and pocket doors. You can also install them on accordion doors, by-pass doors, and pocket doors. You can choose a scuff strip in the shape of a doorknob to match your existing doorknob.

Header beam:

A header beam is a horizontal beam that spans the width of an interior door frame, often on an exterior one. Headers are used in a variety of constructions and are usually made of two-by-four-inch wood. The header supports the door’s opening and transfers the load to jack studs. This structural support has historical roots and dates back to the 15th century in England. Depending on the style of door you choose, a header beam may be unnecessary for an interior door.


Beams for interior door frames are pieces of wood used in the construction of doors. Large timbers serve as structural members and provide support. The interior door frame typically has more than one movable section. Raised moulding is a design feature that extends above the surface of the door. This design differs from solid sticking moulding, which is flush with the surface. The top of the door may be supported by a lintel or head jamb. The frame is also finished with a threshold, which is a horizontal plate below the door and bridges the interior floor.


If your door is heavy, it should have three hinges on the center of the frame. This applies to both hardwood and fire check doors. The thickness of the hinges should also be marked on the door and lining. Once you’ve marked each position, you can install the hinges. Follow these steps to install hinges on interior door frames. Afterward, you can reinstall the door. The steps are described below.